Email Request

OKIMAT 8

The high-end double drive for easy tool-free fitting. Sets high comfort standards. Numerous equipment details, e.g. integrated radio control or optional floor lighting system make use of this drive in bedding furniture even better. In the SPMS version, the drive meets the eco-design directive (standby power consumption < 0.5 W).

  • Load capacity: max. 6000 N on each side (for safety reasons, no pull force)
  • Adjustment speed: max. 5.4 mm/sec. *
  • Equipment options: emergency lowering, synchronous control unit, integrated floor lighting system, fittable from outside, axis diameter: 34 mm; external Bluetooth FURNIBUS adapter, also as wired system, Hall sensor, external SMPS, microprocessor control FURNIBUS
* depending on drive configuration at constant 24/29 V without load

Standard configurations

Performance data

Load capacity

max. 6000 N on each side (for safety reasons, no pull force)

Adjustment speed 1

max. 5,4 mm/sec.

Stroke length

back rest: 48 / 69 / 74 / 87 mm
leg rest: 48 / 69 / 74 / 87 mm

Fitting dimension

installation length: 714 mm
component height: 119 mm
axle distance: 581 mm (+/- 3 mm)
axle diameter: 25 mm

Duty cycle

2/18 min. or 10 %, max. 5 switching cycles per minute

Control unit

relay control with microprocessor technology

Motor voltage

maintenance-free 24 V DC motors

Components

Limit switch

with micro switch

Housing colour

black RAL 9005, grey RAL 7035

Supply cable

EURO-plug, black, straight, 3800 mm

Transformer / Transformer type

EI-core 50 VA, toroidal core110 VA

Further data

Connectivity 2

connections for additional drives (e.g. head end and foot end adjustment, vibration motors)
1 handset or 1 handheld transmitter

Protection type

IP20

Protection class

II

Relative humidity

30% – 75%

Ambient temperature

+10°C - +40°C

Power supply

220-240 V AC 50-60 Hz

Extra configurations

Performance data

Fitting dimension

axis diameter: 34 mm

Control unit

microprocessor control "FURNIBUS", synchronous control unit

Components

Position feedback

Hall sensor

SMPS

external

Further data

Quick release / Retracting function 3

emergency lowering via 9 V battery

Mains isolation

yes

Protection class

III with external SMPS

Equipment options

integrated floor lighting system, fittable from outside, external Bluetooth FURNIBUS adapter, also as wired system

1 depending on the drive configuration and the control components which are used

2 (example, depending on control unit type)

3 Retracting function: The clutch of the lowering function must be open during the entire downward movement.

Produktinformationsanfrage EN

More questions?
captcha