The Microdrive 2 single drive combines strong performance with a compact design. Its installation dimension is only 130 mm plus the stroke. These slim dimensions make the single drive a very compact solution. Thus, chair manufacturers are provided with the upmost freedom of design when integrating this drive into their products.
The Microdrive has a maximum pressure of 3,000 N with a maximum stroke length of 350 mm. The maximum adjustment speed is 35 mm/second while under no load. This enables the drive to quickly and powerfully make seat adjustments. An aluminium guide profile ensures stability and reliability for all Microdrive 2 movements. The versatile single drive features maintenance-free 24 V DC motors.
Small and compact design with optimized performance | |
Requires minimal space |
General data | |
---|---|
Max. push force during adjustments | 3000 N |
Max. pull force during adjustments | 1000 N |
Max. adjustment speed with no load | 35 mm/sec |
Max. stroke length | 350 (+/- 2 mm) mm |
Installation dimensions | 130 + stroke (+/- 2 mm) mm |
Stroke pipe clevis | Hole: 10 mm Slot: 5 mm |
Gear clevis | Hole: 10 mm Slot: 5 mm |
Guiding profile | Aluminium |
Housing colour | Black RAL 9005 |
Duty cycle | 1/8 min |
Duty cycle | 10 % |
Protection degree | IP20 |
Protection class | III |
Relative air humidity | 30 to 75 % |
Ambient temperature | +10 to +40 °C |
Motor voltage | Maintenance-free 24 V DC motors V DC |
Limit cut-off | Micro-switch |
Connection options | |
Components | Optional Hall sensor |
Motor cable | Black, smooth and coiled |
Certificates / Approvals | EN60335-1 IEC60335-1 EN55014-1 EN55014-2 |