Email Request

GIGAMAT

Designed for extreme loads. This high-performance drive offers approx. 100% more mechanical performance than a conventional MEGAMAT-class drive.

  • Load capacity: max. 10000 N push / max. 7000 N pull
  • Adjustment speed: max. 19.3 mm/sec. *
  • Stroke length: max. 550 mm
  • Equipment options: adjustable gear clevis (only for pull-drives up to max. 1000 N), additional limit switch, potentiometer
* depending on drive configuration at constant 24/29 V DC without load

Standard configurations

Performance data

Load capacity

max. 10000 N push
max. 7000 N pull

Adjustment speed 1

max. 19.3 mm/sec.

Stroke length

max. 550 mm

Fitting dimension (B) 2

210 mm + stroke

Duty cycle

2/18 min. or 10 %, max. 5 switching cycles per minute

Motor voltage

maintenance-free 24 V DC motors

Components

Limit switch

with micro switch

Stroke pipe clevis

drill hole: 10 mm
recess: 5/8 mm

Gear clevis

die cast zinc
drill hole: 10 mm
recess: 5/8 mm

Stroke pipe

stainless steel

Guidance profile

aluminum untreated

Housing colour

light grey RAL 7035

Motor connecting line

grey, straight, 300 mm, LSP-plug, PVC
grey, straight, 830 mm, LSP-plug, PVC

Further data

Protection type

max. IPX6

Protection class

III

Relative humidity

30% - 75%

Ambient temperature

+10°C - +40°C

Extra configurations

Components

Position feedback

potentiometer

Clevis

adjustable gear clevis (only for pull drives up to max. 1000 N)

Motor connecting line

pluggable

Further data

Quick release / Retracting function 3

mechanical retracting function up to max. 10000 N (only for push drives), special mechanical retracting system for patient lifter

Equipment options

additional limit switch

1 depending on drive configuration at constant 24/29 V DC without load

2 see technical drawings

3 Retracting function: The clutch of the lowering function must be open during the entire downward movement.

Variants 

Type (Fitting dimension 210mm + Stroke) GIGAMAT 5000 GIGAMAT 7000 GIGAMAT 10000
Max. push / pull force at stroke 0 - 350 mm 5000 / 5000 N 7000 / 7000 N 10000 / 7000 N
Max. push / pull force at stroke 351 - 470 mm 5000 / 5000 N 7000 / 7000 N          -
Max. push / pull force at stroke 471 - 550 mm 5000 / 5000 N         -          -
Adjustment speed 1 up to 19,3 mm/s up to 14,5 mm/s up to 9,6 mm/s

 

1 depending on drive configuration at constant 24/29 V DC without load  

Produktinformationsanfrage EN

More questions?
captcha