Email Request

ID 21

Elegant and convenient electric table height adjustment. The ID 21 system comes without cross bar and without visible function hole in the profile. In addition, the middle profile is entrained.

  • Load capacity: max. 800 N / 180 lbs push
  • Adjustment speed: max. 38 mm (1.49")/sec. with and without load *
  • Stroke length: 650 mm / 25.59"
  • 3-part rectangular steel column, 2-stage telescopic upwards, inner profiles move outwards
* depending on drive configuration at constant 24/29 V DC without load

Standard configurations

Performance data

Load capacity

max. 800 N / 180 lbs push

Adjustment speed 1

max. 38 mm (1.49") / sec. with and without load

Stroke length

650 mm / 25.59"

Fitting dimension

520 mm / 20.47"

Duty cycle

2/18 min. or 10 %, max. 5 switching cycles per minute

Motor voltage

maintenance-free 24 V DC motor

Components

Limit switch

below: via microswitches
above: via virtual limit switches

Housing colour

lifting column: outer/middle/inner profile: silver RAL 9006, black RAL 9005, white RAL 9016

Supply cable

1200 mm / 47.24", straight

Further data

Protection type

IP20

Protection class

III

Relative humidity

30% – 75%

Ambient temperature

+10°C - +40°C

1 depending on the drive configuration and the control components which are used

Produktinformationsanfrage EN

More questions?
captcha