Elegant and convenient electric table height adjustment. The ID 21 system comes without visible function hole in the profile and with an entrained middle profile.
Modern design | |
Patented sliding system for excellent stability | |
Smooth profiles without holes or grooves | |
Minimum air gap between the individual profiles | |
Powerful 24 V DC motor with 2 Hall sensors | |
Special gear for whisper-quiet operations | |
All column profiles move synchronously | |
Use for constructing stable table systems according to DIN EN 527 and DIN Fb 147 | |
German engineering and design | |
Produced in the EU |
Performance data | |
---|---|
Load capacity | max. 800 N / 180 lbs push |
Adjustment speed 1 | max. 38 mm (1.49") / sec. with and without load |
Stroke length | 650 mm / 25.59" |
Fitting dimension | 520 mm / 20.47" |
Duty cycle | 2/18 min. or 10 %, max. 5 switching cycles per minute |
Motor voltage | maintenance-free 24 V DC motor |
Components | |
Limit switch | below: via microswitches above: via virtual limit switches |
Housing colour | lifting column: outer/middle/inner profile: silver RAL 9006, black RAL 9005, white RAL 9016 |
Supply cable | 1200 mm / 47.24", straight |
Further data | |
Protection type | IP20 |
Protection class | III |
Relative humidity | 30% – 75% |
Ambient temperature | +10°C - +40°C |
1 depending on the drive configuration and the control components which are used