OKIMAT 4
Drive technology for the most demanding requirements
Powerful with outstanding mechanical stability: this is the OKIMAT 4 (cable version). This double drive has a stylish housing that has been optimized for logistics. The operations are very quiet. The built-in electronic overload cut-off for the double drive prevents any overloads. A reset function is available on request. The connected 9-volt battery makes it possible to return to the sleeping position – at any time and independent of the mains power supply.
The double drive has a built-in switched-mode power supply unit. It can be used globally because of the wide-range voltage input (100 to 240 V/AC). The efficient and stylish OKIMAT 4 (cable version) is designed in compliance with the Eco-design directive. The power consumption in standby mode is less than 0.2 watts.
Versatility throughout all levels
When used with the HE150 pluggable control unit, the functional range is extended with Bluetooth, memory function, massage and MFP (multi-functional port). Other components can also be plugged in separately: such as the radio (2.4 GHz bidirectional) and Bluetooth controller. On request, the double drive can be equipped with an adapter plate/mounting plate.
お客様のメリット
A small stable housing |
|
Discreet appearance |
|
Wide-range voltage input (100 – 240V/AC) enables global use |
|
Eco-design directive (power consumption < 0.2 W in standby mode) |
|
Electronic overload switch-off |
|
Pluggable mains power cord |
|
Optimized logistics because of smaller housing |
|
Stylish housing |
|
Noise-optimized |
|
Pluggable bidirectional 2.4 GHz radio control |
|
Pluggable Bluetooth control for iOS and Android |
|
Control unit (HE150) with radio wave, Bluetooth, memo, massage and MFP port) |
標準構成
Max. adjustment load per side |
OM4-IPSe 4500N OM4-IPS 6000N |
Max. adjustment speed at nominal load |
IPSe 4,0 mm/sec IPS 3,3 mm/sec |
Max. torque |
OM4-IPSe 324Nm OM4-IPS 432Nm |
Stroke length of head section |
69 / 74 / 87 mm |
Stroke length of foot section |
69 / 74 / 87 mm |
Fitting dimension length |
708 mm |
Fitting dimension height |
105 mm |
Fitting dimension, centre distance |
581 -+ 1 mm |
Fitting dimension, spindle diameter |
OM4-IPSe 25mm OM4-IPS 25 / 34mm |
Duty cycle |
2/18 min |
Protection degree |
IP20 |
Protection class |
II |
Relative humidity |
20 – 95 % |
Ambient temperatures |
0 to +40 °C |
Mains power connection |
100-240 V/AC |
Control unit |
Relay control |
Motor |
24 – 29 V DC motors, maintenance-free |
Limit shut-off |
Micro-switch |
Housing colour |
Black RAL 9005 |
Options |
Relay control External SMPS wide-range power supply Adapter plate for mounting of external RF control units |
Configuration options |
Adapter plate for Okimat 4/Mounting plate |
Certificates / Approvals |
EN 60335-1 EN 62233 EN 55014-1 EN 55014-2 |
