Gear clevis
GAMMADRIVE
Stable, tried-and-tested unit for powerful applications, e.g. for height, back and foot end adjustment on beds and armchairs. Extra-slim actuator housing for tight installation conditions.
- Load capacity: max. 4000 N push / max. 3000 N pull
- Adjustment speed: max. 44 mm/sec. *
- Stroke length: max. 500 mm (+/- 1 mm)
- Equipment options: stroke pipe clevis made of die cast zinc, Hall sensor
Standard configurations
Performance data |
|
|---|---|
Load capacity |
max. 4000 N push max. 3000 N pull |
Adjustment speed 1 |
max. 44 mm/sec. |
Stroke length |
max. 500 mm (+/- 1 mm) |
Fitting dimension |
min. 175 mm + stroke (+/- 2 mm) |
Duty cycle |
2/18 min. or 10 %, max. 5 switching cycles per minute |
Motor voltage |
maintenance-free 24 V DC motors |
Components |
|
Limit switch |
with micro switch |
Stroke pipe clevis |
plastic drill hole: 10 mm recess: 5 mm |
Gear clevis |
plastic drill hole: 10 mm recess: 5 mm |
Stroke pipe |
aluminum untreated |
Guidance profile |
aluminum untreated |
Housing colour |
black RAL 9005 |
Motor connecting line |
black, straight, 300 mm black, straight, 1000 mm black, spiralled, 1500 mm black, spiralled, 2500 mm |
Further data |
|
Protection type |
IP20 |
Protection class |
III |
Relative humidity |
30% – 75% |
Ambient temperature |
+10°C - +40°C |
Extra configurations
Components |
|
|---|---|
Position feedback |
Hall sensor |
Further data |
|
Equipment options |
safety spindle nut with push but without pull function |
1 depending on drive configuration at constant 24/29 V DC without load
