DUOMAT 10: Stable double drive for nursing and hospital beds

The DUOMAT 10 is a standardized double drive for the EASY DRIVE- drive system with an externally mounted SMPS. Users benefit from the compact and stable design, the high IP protection and the ease of installation. These characteristics make this single-fault-protected double drive especially well-suited for combined head and back section adjustments. It also features IPX4 protection against the ingress of very small contaminants or foreign particles. The double drive stands out with its elegant black housing.

The adjustment load is up to max. 3,500 newtons per side. The maximum adjustment speed is 3.9 mm/s.

Many configuration options

The DUOMAT 10 can be connected with two slave drives and a handset. The double drive can also be equipped optionally with an emergency lowering mechanism.

Customer benefits

Integrated SMPS and plug-in mains cable wide voltage range for global operation

Meets eco-design directive (standby power consumption <0.5 W)

Standard configurations

Standard configurations

Adjustment load

max. 4500 N push only

Adjustment speed

max. 3,9 mm/sec(without loading)

Stroke length

back rest 87 mm, leg rest 69 mm

Fitting dimension (B)

581 mm (+/- 3 mm)

Duty cycle

2/18 min. or 10%, max. 5 switching cycles per minute

input voltage

wide input voltage range 100-240 V AC

Protection degree


Protection class


Type of Transformer

Switching mode power supply (SMPS)


light grey ,black

main cable

pluggable main cable, USA, ENG, EU, CHN, AUS…


with 2 single drives,operating elements:1-2
For the display of Youtube, it is necessary that you accept YSC cookies. For more information, please see our privacy policy.

Contact form

Contact form